Konica Minolta bizhub 500 User Manual page 315

Application Functions
7
8
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Select additional copy conditions, as desired.
– To make a folded booklet of the same size as the original size,
manually select the paper size twice the original size. In this case,
the recommended magnification ratio of e0.707 will be changed to
e1.000 automatically.
– Simplex/Duplex setting is automatically specified as 1%2. If the
double-sided original is loaded in the ADF, touch [Simplex/Duplex]
to select 2%2 mode on the Simplex/Duplex Screen.
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
6
6-73