Konica Minolta bizhub 500 User Manual page 534

11
8
Downloaded From ManualsPrinter.com Manuals
11-20
– While keeping the saddle stitcher
tray open, push in the staple
holder to its original position,
then pull it up until it clicks in
place.
– Gently return the saddle stitcher
tray to its original position.
Open the stapling part of the saddle
stitcher, then close it.
The saddle stitcher will be reset, and
the copying job using Fold & Staple
mode will be available.
Supplies & Handling
bizhub 500/420/360 (Phase 3)