To Specify Separator Output Mode - Konica Minolta bizhub 500 User Manual

Finishing/Folding

To specify Separator output mode

0 As the default setting, Sort is selected. No limit is established in Sort
0 Some copy conditions are incompatible with Group mode. For details,
0 If no finisher is installed and the following conditions are met, printed
0 The tray 1 (upper tray) capacity is max. 100 sheets, and tray 2 (lower tray)
1
2
3
4
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
mode.
see "Copy Conditions Incompatible with Finishing/Folding" on
page 7-32.
copies can be fed out and sorted in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the crosswise orientation
v in one paper tray and with the lengthwise orientation w in other tray.
"Auto Paper Select" setting is selected.
The "Auto Zoom" setting is used when the Mixed Original setting is
selected.
capacity is max. 250 sheets. If a copy run of more than those limits is
required, be sure to remove the copies from the tray before the maximum
capacity is reached.
Position the original to be copied.
Using the keypad, enter the desired number of copies.
Load the desired copy paper size in a tray.
– When using an alternating crisscross pattern, load A4- or B5-size
paper with portrait orientation v in one paper tray and with the
landscape orientation w in other tray.
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
7
7-29