Konica Minolta bizhub 500 User Manual page 650

16
Setting Item/Description
Downloaded From ManualsPrinter.com Manuals
16-28
Registering and Changing Addresses
Allow/Restrict to enter the address of recipient
manually on the Scanner Screen.
Allow/Restrict
Changing Zoom Ratio
Allow/Restrict to alter already programmed
magnification ratios.
Allow/Restrict
Changing the "From" Address
Select whether or not to allow the specified
From Address to be changed.
Allow/Restrict
Changing Image Overlay
Select whether or not an image stored with the
"Store Overlay" function can be deleted or over-
written.
Allow/Restrict
4 Restrict Operation Setting
Restrict Fax Broadcasting
Select whether to prevent multiple recipients
from being specified for fax transmissions.
ON/OFF
7 Expert Adjustment
1 Original Image Density
Specify the original image type and adjust the densi-
ty.
• Function: Copy/Fax
• Original Type: Text/Photo/Text Photo/Dot Matrix
• Density Adjustment
Text/Photo: 0 (Light) ~ 5 (Dark): 3
Text: 0 (Light) ~ 5 (Dark): 3
Photo: 0 (Light) ~ 5 (Dark): 1
Dot Matrix: 0 (Light) ~ 5 (Dark): 2
2 Erase Adjustment
Specify the conditions in operating the Non Image
Area Erase function, and also specify the erase
amount of the ADF Frame Erase function.
Non Image Area Erase: Always/Only when Auto
Size or e1.0 is selected/Do Not Erase when e1.0
is selected
Non Image Area Erase Setting: Auto/Specify
• How to Erase: Diagonal Erase/Square Erase
• Original Density: 1 (Light) ~ (Dark)
ADF Frame Erase: 0 to 5 mm in 1 mm incre-
ments
3 Finisher Adjustment
1 Center Staple Position
Adjust the dislocation of the center staple posi-
tion on each paper size.
-5.0 to 5.0 mm in 0.5 mm increments
Utility <Administrator Setting>
Default
Allow
Allow
Allow
Restrict
ON
• Function: Copy
• Original Type: Text/Photo
• Density Adjustment
Text/Photo: 3
Text: 3
Photo: 1
Dot Matrix: 2
Do Not Erase when e1.0 is
selected
Specify
• How to Erase: Square
Erase
• Original Density: 3 (Std.)
3 mm
0.0 mm
bizhub 500/420/360 (Phase 3)