Konica Minolta bizhub 500 User Manual page 291

Application Functions
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Reminder
Non-Image Area Erase function may not operate properly for dark
original. In this case, check this function using the original with white
background.
This function may also perform incorrectly if the lighting in the work place
is directly over the original glass. In this case, consult your service
representative about an appropriate place for installation.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
6
6-49