Expert Adjustment>3 Finisher Adjustment - Konica Minolta bizhub 500 User Manual

16
7 Expert Adjustment>3 Finisher Adjustment
Use this function to make the following adjustments for finisher options.
Adjustment menu items may differ depending upon the configuration of the
machine options being installed.
0 Perform Center Staple Position and Half-Fold Position for the machine
with Finisher FS-510 and Saddle stitcher SD-502 installed.
0 Perform Punch Horizontal Position and Punch Resist Loop Size for the
machine with Finisher FS-510 and Punch unit PU-501 installed, or for the
machine with Finisher FS-511 installed.
0 Follow the steps as 1-2-3-7-8 for making Center Staple Position.
Follow the steps as 1-2-4-7-8 for making Half-Fold Position.
Follow the steps as 1-2-5-7-8 for making Punch Horizontal Position.
Follow the steps as 1-2-6-7-8 for making Punch Resist Loop Size.
Downloaded From ManualsPrinter.com Manuals
16-76
Utility <Administrator Setting>
bizhub 500/420/360 (Phase 3)