To Specify Output Mode - Konica Minolta bizhub 500 User Manual

Finishing/Folding

To specify output mode

0 As the default setting, Group is selected. When 2 sets or more are
0 Some copy condition is incompatible with Group. For details, see "Copy
0 If no finisher is installed and the following conditions are met, printed
0 The output tray capacity is max. 250 sheets. If a copy run of more than
1
2
3
4
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
entered, automatically output in sort mode.
Conditions Incompatible with Finishing/Folding" on page 7-32.
copies can be fed out and sorted in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the crosswise orientation
v in one paper tray and with the lengthwise orientation w in other tray.
"Auto Paper Select" setting is selected.
The "Auto Paper Select" setting is not selected when the Mixed Original
setting is selected.
250 is required, be sure to remove the copies from the output tray before
the maximum capacity is reached.
Position the original to be copied.
Using the keypad, enter the desired number of copies.
Load copy paper into the tray.
– When using an alternating crisscross pattern, load A4- or B5-size
paper with portrait orientation v in one paper tray and with the
landscape orientation w in other tray.
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
7
7-5