Folding Copies At The Center/Binding Copies At The Center: Half Fold/ Fold & Staple - Konica Minolta bizhub 500 User Manual

7
7.5 Folding Copies at the Center/Binding Copies at the
Center: Half Fold/ Fold & Staple
The Half Fold and Fold & Staple modes are
available on the machine mounted with
Finisher FS-510 and Saddle Stitcher
SD-502 as illustrated on the right, along
with Booklet function which will be
automatically selected in combination.
- In the Half Fold mode, each copied sheet is creased and output to the
Saddle stitcher tray.
- In the Fold & Staple mode, each copied set is creased and stapled at two
positions (saddle stitched), then output to the Saddle stitcher tray.
Note
Finisher FS-510 is initially equipped with two exit trays, and one optional
exit tray (OT-601) can be installed. Contact your service representative, if
desired. (Already installed in the above illustration.)
Downloaded From ManualsPrinter.com Manuals
7-24
Finishing/Folding
bizhub 500/420/360 (Phase 3)