Konica Minolta bizhub 500 User Manual page 233

Combine Originals/ Original Image Type
5
!
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
– The Original Direction Screen with the original placed on the original
glass
Touch [OK], then touch [Basic] tab.
The Basic Screen will be restored.
Detail
The Original Direction setting will not be cleared after a job completion
until the reset function is activated.
The machine can be set to reset the Original Direction setting to the
factory default each time a single job is completed. For details, see "9
Reset Setting > 3 Job Reset" on page 16-93.
Note
Touch [Cancel] on the Original Direction Screen to cancel the setting
change.
Press [Reset] on the control panel to restore the factory default setting.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
5
5-17