Konica Minolta bizhub 500 User Manual page 155

Basic Copy Operations
3
4
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Touch [Custom Size].
The Custom Size Screen will be displayed.
Enter the length (X) and width (Y) of the paper.
– Check that [X] is highlighted, then enter the size of side X from the
control panel keypad. (148.0 mm - 431.8 mm)
– Touch [Y] to highlight it, then enter the size of side Y from the
control panel keypad. (92.0 mm - 297.0 mm)
– To recall the stored non-standard size, touch one of [memory 1] to
[memory 5]. The name displayed on the key may have been
changed when stored.
? What should be done if the message "Input Error" is displayed and
entered size cannot be stored?
The value just entered is out of available range.
% Press [C] (Clear) on the control panel, then reenter the correct value.
4
4-27