Increase Priority For Printing An Active Job In Current Jobs - Konica Minolta bizhub 500 User Manual

9

Increase Priority for Printing an Active Job in Current Jobs

The next job to be printed after the current job being printed can be selected.
0 If an Administrator mode function was set so that the output priority of
jobs cannot be changed, [Increase Priority] does not appear and the
output priority of the jobs cannot be specified. For details, refer to "6
Restrict User Access>3 Restrict Access to Job Settings" on page 16-67.
0 If the output priority of jobs is set when the job which can be interrupted
is printed, printing is interrupted and printing of the job given priority
begins.
Printing of the interrupted job is automatically restarted once printing for
the job given priority is finished.
0 When copying a job by interrupt or printing a job by the output priority,
another job cannot be copied by interrupt.If the output priority of jobs is
set when the job which cannot be interrupted is printed, printing begins
after the current printing completes.
1
2
3
4
Downloaded From ManualsPrinter.com Manuals
9-22
Touch [Job List] on the touch screen.
– When the current list of jobs using the Print functions is not
displayed, touch [Print] tab.
The current list of jobs using the Print functions is displayed.
Touch [Active Jobs].
The Current Jobs list of active jobs will be displayed.
Touch [Increase Priority].
The Increase Priority Screen will be displayed.
In the job list of the Increase Priority Screen, touch the key for a job to
be given priority to select it, and then touch [OK].
Job Management (Job List)
bizhub 500/420/360 (Phase 3)