Positioning Original On The Original Glass - Konica Minolta bizhub 500 User Manual

10

Positioning Original on the Original Glass

Use the original glass when originals are not suitable for use with the ADF, or
when setting copying conditions incompatible with the ADF.
The machine will detect the original size automatically when the original is
positioned on the original glass with ADF closed, then select an appropriate
paper size automatically by Auto Paper Select function.
Item
Original type
Original Size
Auto Original Size Detect
Maximum original weight
Maximum original thickness
Observe the following precautions when placing the original on the original
glass.
- The size of original printed on paper in inch sizes (such as 11 e 17, 8-1/2
e 14, 8-1/2 e 11) cannot be automatically detected. The setting must be
specified by the technical representative. For details, contact the service
representative.
- If a custom-sized original is positioned, the "Auto Paper Select" and
"Auto Zoom" settings cannot be used since the original size cannot be
detected automatically. If a custom-sized original is positioned, select
the size of the paper to be copied.
- If highly translucent or transparent original, such as overhead
transparencies or trace paper, are positioned, the original size cannot be
detected automatically. Place a blank sheet of paper of the same size
over the original.
- Do not place objects exceeding 6.8 kg on the original glass, otherwise the
original glass may be damaged.
- If a book is placed on the original glass, do not press it down extremely
hard, otherwise the original glass may be damaged.
Downloaded From ManualsPrinter.com Manuals
10-18
Paper and Original Information
Description
Sheets, books (spreads), three-dimensional objects
128 mm e 139.7 mm to 297 mm e 431.8 mm
A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, 11 e 17 w, 8-1/2
e 11 w/v
6.8 kg
30 mm
bizhub 500/420/360 (Phase 3)