Setting Repeat Times Automatically - Konica Minolta bizhub 500 User Manual

6

Setting Repeat Times Automatically

Select the Auto Detect or Set Range mode to automatically detect or
manually specify the original image size, then let the machine determine the
number of repeats from specified mode and magnification ratio.
0 Scan the original from original glass. The ADF cannot be used to scan the
original.
0 Auto Detect mode uses Non-Image Area Erase function to automatically
detect the original size. Keep the ADF open.
0 Set Range mode does not use Non-Image Area Erase function. Close the
ADF.
0 Use Set Range mode to repeat a part of the original, not the entire image,
by specifying the scanning area.
Select the standard size or enter the dimensions of custom size.
Available dimensions: 30.0 ~ 432.0 mm for side X, 30.0 ~ 297.0 mm for
side Y
0 Select With Margin to leave the marginal area blank without printing
defective images. Or, select Without Margin to print the defective images
around the edges.
0 Tray 1 will be automatically selected as copy paper tray source.
Change the tray selection manually, if desired. Auto Paper Select will not
function.
0 Auto Zoom will not function. Specify the desired magnification ratio.
1
2
3
Downloaded From ManualsPrinter.com Manuals
6-52
Position the original on the original glass.
– Keep the ADF open.
Enter the desired print quantity from the control panel keypad.
Load the desired copy paper into any tray.
Application Functions
bizhub 500/420/360 (Phase 3)