Konica Minolta bizhub 500 User Manual page 353

Application Functions
4
5
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Touch [Stamp/Overlay], then touch [Page #].
The Page # Screen will be displayed.
Specify the start number and page number type.
– Touch [Page #] under Start No., then enter the desired start number
from the control panel keypad.
Press [1] on the control panel to switch the value from plus to minus
and vice versa.
– To start the page number from the first page of each chapter, touch
Chapter to highlight it, then enter the desired start number from the
control panel keypad.
Press [1] on the control panel to switch the value from plus to minus
and vice versa.
6
6-111