Grass Container Full Switch Timer Relay [Gr1600Eu, Gr1600F] - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

(14) Grass Container Full Switch Timer Relay [GR1600EU, GR1600F]

Removing Relay
1. Remove the grass container.
2. Remove the discharge duct.
3. Remove the screws (1).
4. Push the relay stay (2).
5. Remove the timer relay (3).
(1) Screw
(2) Relay Stay
Timer Relay Connector Voltage
1. Measure the voltage with a voltmeter across the Red / White
terminal (2) and chassis.
2. Turn the main switch on, and measure the voltage across the
Yellow terminal (3) and chassis.
3. If these voltages differ from the battery voltage, the wiring
harness or main switch is faulty.
Red / White terminal (2) –
Chassis
Voltage
Yellow terminal (3) –
Chassis
(1) Timer Relay
(2) Red / White Terminal (From Battery)
(3) Yellow Terminal
(From Grass Container Fill Switch)
Test of Timer Relay
1. Remove the timer relay.
2. Connect the jumper leads across the battery terminal and the
Red / White terminal (1), and across the battery positive
terminal and the Yellow terminal (2).
3. Connect the jumper lead across the battery negative terminal
and the Black terminal (4), and across the battery negative
terminal and the Blue terminal.
4. Connect the jumper lead across the Red terminal (3) and the
bulb terminal.
5. The bulb lights up when disconnecting the jumper lead from the
Red / White terminal (1) 0.7 to 1.3 seconds, the timer relay is
proper.
(1) Red / White Terminal (From Battery)
(2) Yellow Terminal
(From Grass Container Fill Switch)
(3) Red Terminal
(To Key Stop Solenoid)
6-S20
ELECTRICAL SYSTEM
(3) Timer Relay
9Y1210595ELS0002US0
Approx. battery voltage
Approx. battery voltage
(4) Red Terminal
(To Key Stop Solenoid)
(5) Black Terminal (To Frame Earth)
9Y1210595ELS0027US0
(4) Black Terminal (To Frame Earth)
(5) Bulb (Load)
(6) Battery
9Y1210595ELS0028US0
KiSC issued 11, 2013 A