Hst Charge Pressure - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

(2) HST Charge Pressure

[A] GR1600EU, GR1600F
Adjusting Maximum Speed
NOTE
• You must adjust this after you complete the adjustment of
neutral.
[Forward]
1. Loose the lock nut (2) of adjusting screw.
2. Adjust the length "A" with the adjusting screw (1).
(Reference)
• Length "A": 12 to 15 mm (0.48 to 0.59 in.)
• Traveling speed: 9.0 to 10 km/h (5.6 to 6.2 mph)
[Reverse]
1. Loose the lock nut (3) of adjusting screw.
2. Adjust the length "B" with the adjusting screw (4).
(Reference)
• Length "B": 12 to 13 mm (0.47 to 0.51 in.)
• Traveling speed: 4.0 to 5.0 km/h (2.5 to 3.1 mph)
(1) Adjusting Screw
(2) Lock Nut
Removing Container
1. Pull the top cover lock lever (2) to open the top cover (1).
2. Set the grass container lift lever (4) in "LEVER LOCK" position.
3. Lift up the rear of the grass container (3).
4. Lift up the whole grass container and remove.
(When attaching)
• Open the top cover (1).
• Set the grass container lift lever (4) in "LEVER LOCK" position.
• Lift the rear end of the grass container (3), set the grass
container (3) onto the frame shaft so that a clearance "L" is
about 0 to 50 mm (0 to 1.9 in.).
• Lock the grass container (3) with the grass container lift lever (4)
in "CONTAINER LOCK" position.
• Close the top cover (1).
(Reference)
• Clearance "L": 0 to 50 mm (0 to 1.9 in.)
(1) Top Cover
(2) Top Cover Lock Lever
2-S7
TRANSAXLE
(3) Lock Nut
(4) Adjusting Screw
9Y1210595TXS0016US0
(3) Grass Container
(4) Grass Container Lift Lever
9Y1210595TXS0001US0
KiSC issued 11, 2013 A