Kubota GR1600EU Workshop Manual page 163

GR1600EU, WSM
Battery
CAUTION
• When disconnecting the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Open the bonnet.
2. Disconnect the negative cable (1) from the battery.
3. Disconnect the positive cable (2) from the battery and remove
the battery (3).
(1) Negative Cable
(2) Positive Cable
Seat
1. Remove two snap pins (2), (4).
2. Remove the seat (1) and snap plate (3).
(1) Seat
(2) Snap Pin
Fender and Relay
1. Remove the lever grip (1) and cutting height control dial (6).
2. Remove the speed change pedal (7).
3. Remove the seat base (2).
4. Peel the step sheet (8) halfway.
5. Remove the fuel cap (4).
6. Remove the relay stay (9).
7. Disconnect the connectors for the timer relay, grass container
full switch relay, grass container relay and buzzer relay.
8. Remove the fender (5).
(1) Lever Grip
(2) Seat Base
(3) Fender Mounting Screw
(4) Fuel Cap
(5) Fender
Fuel Tank
1. Drain the fuel.
2. Disconnect the fuel hoses.
3. Remove the fuel tank (1).
(1) Fuel Tank
2-S13
TRANSAXLE
(3) Battery
9Y1210595ENS0023US0
(3) Snap Plate
(4) Snap Pin
9Y1210595TXS0019US0
(6) Cutting Height Control Dial
(7) Speed Change Pedal
(8) Step Sheet
(9) Relay Stay
9Y1210595TXS0020US0
9Y1210595TXS0021US0
KiSC issued 11, 2013 A