GR1600EU, WSM
(4) Safety Switch
PTO Switch
1. Remove the battery.
2. Remove the fender.
3. Disconnect the connector from the PTO switch (1).
4. Measure the resistance with an ohmmeter between the
terminals.
5. If the PTO switch is damaged, replace it.
Resistance
When plunger is pushed
(between terminal a
When plunger is released
and b)
Resistance
When plunger is pushed
(between terminal c
When plunger is released
and d)
(1) PTO Switch
(2) PTO Lever
Brake Switch
1. Remove the battery.
2. Remove the fender.
3. Disconnect the connector from the brake switch (1).
4. Measure the resistance with an ohmmeter between the
terminals.
5. If the brake switch is damaged, replace it.
Resistance
When plunger is pushed
(between terminal a
When plunger is released
and b)
Resistance
When plunger is pushed
(between terminal c
When plunger is released
and d)
(1) Brake Switch
6-S11
ELECTRICAL SYSTEM
0 Ω
Infinity
0 Ω
Infinity
a to d: Switch Terminal
9Y1210595ELS0016US0
0 Ω
Infinity
0 Ω
Infinity
a to d: Switch Terminal
9Y1210595ELS0017US0
KiSC issued 11, 2013 A