Kubota GR1600EU Workshop Manual page 42

GR1600EU, WSM
Checking Engine Start System [GR1600ID]
The engine Start System in your machine are designed to
protect you while operating. Please check these Engine Start
System periodically - daily is best - to test function of the Engine
Start System before operation.
CAUTION
To avoid personal injury:
• Do not allow anyone near machine while testing.
• If the machine does not pass one of the following tests, do
not operate the machine.
See your local KUBOTA Dealer.
• Sit on operator's for all tests.
IMPORTANT
• Check the following tests before operating the machine.
Test 1 (Safety Start Control 1)
1. Depress the brake pedal fully.
2. Engine the PTO lever.
3. Turn the key switch to the "START" position.
4. The engine should not crank.
Test 2 (Safety Start System Control 2)
1. Disengage the PTO lever.
2. Release the brake pedal.
3. Turn the key to the "START" position.
4. The engine should not crank.
(1) Brake Pedal
(2) PTO Lever
Checking OPC System [GR1600ID]
The OPC (Operator Presence Control) system in your machine
are designed to protect you whole operating.
Please check these OPC system periodically - daily is best - to
test function of the OPC system before operation.
CAUTION
To avoid personal injury:
• Do not allow anyone near the machine while testing.
• If the machine does not pass one of the following tests, do
not operating the machine.
See your local KUBOTA dealer.
IMPORTANT
• Check the following tests before operating the machine.
Test1 (Seat Safety Control 1)
1. Run the engine at half throttle.
2. Engage the PTO lever.
3. Stand up. (DO NOT GET OFF THE MACHINE.)
4. Engine should shut off.
Test1 (Seat Safety Control 2)
1. Run the engine at half throttle.
2. Disengage the PTO lever.
3. Release the brake pedal.
4. Stand up. (DO NOT GET OFF THE MACHINE.)
5. Engine should shut off.
(1) Brake Pedal
(2) PTO Lever
G-24
GENERAL
(3) Key Switch
(4) Throttle Lever
9Y1210595GEG0058US0
(3) Key Switch
(4) Throttle Lever
9Y1210595GEG0059US0
KiSC issued 11, 2013 A