GR1600EU, WSM
(2) Dynamo
Stator
1. Remove the nut (3) and separate the stator comp. (4).
2. Remove the screws (1) and remove the stator (2).
Tightening torque
Nut
(1) Screw
(2) Stator
Rotor
1. Tap out the shaft (1) from the rotor (3).
(When reassembling)
• Be careful the direction of the collar (4), the flat side should face
to the pulley (2) side.
(1) Shaft
(2) Pulley
(3) Rotor
6-S23
ELECTRICAL SYSTEM
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
(3) Nut
(4) Stator Comp.
9Y1210595ELS0048US0
(4) Collar
(5) Bearings
(6) Collar
9Y1210595ELS0049US0
KiSC issued 11, 2013 A