Tightening Torques - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-12.)
Center pin locking nut
Tie-rod mounting locking nut
Item N·m
78 to 90
48 to 55
4-S3
FRONT AXLE
kgf·m lbf·ft
7.9 to 9.2 58 to 66
4.9 to 5.7 36 to 41
9Y1210595FBS0003US0
KiSC issued 11, 2013 A