Kubota GR1600EU Workshop Manual page 23

GR1600EU, WSM
• Securely insert grommet.
(1) Grommet
• Securely clamp, being careful not to damage wiring.
(1) Clamp
(Wind Clamp Spirally)
(2) Wire Harness
• Clamp wiring so that there is no twist, unnecessary sag, or
excessive tension, except for movable part, where sag be
required.
(1) Wiring
(2) Clamp
• In installing a part, be careful not to get wiring caught by it.
(1) Wiring
• After installing wiring, check protection of terminals and
clamped condition of wiring.
(1) Cover
(Securely Install Cover)
G-5
GENERAL
(A) Correct
(B) Incorrect
WSM000001GEG0066US0
(3) Clamp
(4) Welding Dent
WSM000001GEG0067US0
(A) Correct
(B) Incorrect
WSM000001GEG0068US0
(A) Incorrect
WSM000001GEG0069US0
WSM000001GEG0070US0
KiSC issued 11, 2013 A