DIESEL PARTICULATE FILTER HANDLING MANUAL, WSM
[2] SEPARATION OF DPF MUFFLER FULL ASSY
Follow the procedures below to separate DPF muffler full assy from a product (engine).
Prior Arrangement for Installation and Removal of DPF
1. Before removing the DPF muffler full assy from a product
(engine), connect the diagnosis tool (Diagmaster), check the
failure history (DTC), and save to the "Project" on the
Diagmaster.
Before removing the DPF for cleaning, keep the records of the
engine serial number, DPF filter complete part number, DPF
filter complete serial number, and engine operating time, which
are required in preparing the DPF cleaning order form.
Record the engine operating time by checking the "Hourmeter"
on the data monitor of the diagnosis tool (Diagmaster).
(1) Engine Serial Number
(2) DPF Filter Complete Part Number /
DPF Filter Complete Serial Number
1-S7
ENGINE
(a) CAN Communication Connector
(For Servicing)
[A] D1803-CR-E4, D1803-CR-TE4,
V2403-CR-E4, V2403-CR-TE4
[B] V2607-CR-E4, V2607-CR-TE4,
V3307-CR-TE4
[C] V3800-CR-TE4, V3800-CR-TIE4,
V3800-CR-TE4C,
V3800-CR-TIE4C
[D] D1803-CR-E4, D1803-CR-TE4,
V2403-CR-E4, V2403-CR-TE4,
V2607-CR-E4
[E] V2607-CR-TE4, V3307-CR-TE4
[F] V3800-CR-TE4, V3800-CR-TIE4,
V3800-CR-TE4C,
V3800-CR-TIE4C
KiSC issued 09, 2013 A