Fuel Pump; Engine Stop Solenoid - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

(7) Fuel Pump

(8) Engine Stop Solenoid

Connector Voltage
1. Disconnect the 2P connector from the fuel pump.
2. Turn the main switch key to the "ON" position, and measure the
voltage with a voltmeter between the connector terminals.
3. If the voltage differs from the battery voltage, the wiring harness
or main switch is faulty.
Between connector
Voltage
terminals
Fuel Pump
1. Disconnect the 2P connector from the fuel pump.
2. Check the continuity between the connector terminals with an
ohmmeter.
3. If it does not conduct, the fuel pump is faulty.
Engine Stop Solenoid Test
1. Disconnect the 1P connector from the engine stop solenoid.
2. Remove the engine stop solenoid from the engine.
3. Connect the jumper leads from the battery positive terminal to
the 1P connector, and from the battery negative terminal to the
engine stop solenoid body.
4. If the solenoid plunger is not attracted, the engine stop solenoid
is faulty.
(1) Battery (12 V)
6-S14
ELECTRICAL SYSTEM
Approx. battery voltage
9Y1210595ELS0022US0
9Y1210595ELS0023US0
9Y1210595ELS0024US0
KiSC issued 11, 2013 A