Kubota GR1600EU Workshop Manual page 282

GR1600EU, WSM
Disassembling Pulley Holder
1. Remove the pulley mounting nut (12), and remove the pulley (11).
2. Tap out the blade shaft (1).
3. Remove the pulley holder (6) from the mower deck.
4. Remove the oil seal (2), (8).
5. Remove the ball bearings (3), (7) and collar (4).
Pulley holder mounting nut
Tightening torque
Pulley holder mounting
screw
103 to 117 N·m
10.5 to 12.0 kgf·m
76.0 to 87.0 lbf·ft
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
7-S19
MOWER
(1) Blade Shaft
(2) Oil Seal
(3) Ball Bearing
(4) Collar
(5) Pulley Holder Mounting
Screw
(6) Pulley Holder
(7) Ball Bearing
(8) Oil Seal
(9) Pulley Plate
(10) Pulley Holder Mounting Nut
(11) Pulley
(12) Pulley Mounting Nut
9Y1210595MOS0030US0
KiSC issued 11, 2013 A