Kubota GR1600EU Workshop Manual page 202

GR1600EU, WSM
Fender
1. Remove the speed change pedal (5).
2. Peel the step sheet (4) halfway.
3. Remove the fuel cap (1).
4. Remove the fender (2).
(1) Fuel Cap
(2) Fender
(3) Fender Mounting Screw
Steering Wheel, Side Bonnet and Panel
1. Remove the steering wheel (1).
2. Remove the side bonnet (3).
3. Remove the accelerator lever grip.
4. Disconnect the connectors for hour meter (4), main switch (5)
and light switch.
5. Remove the indicator lamps (6).
6. Remove the fuse box (7) from the steering support.
7. Remove the panel (2).
(When reassembling)
Steering Wheel mounting
Tightening torque
nut
(1) Steering Wheel
(2) Panel
(3) Side Bonnet
(4) Hour Meter
Separating Engine
1. Refer to "[2] PREPARATION" on page 1-S19.
3-S5
BRAKES
(4) Step Sheet
(5) Speed Change Pedal
9Y1210595BRS0009US0
20 to 24 N·m
2.0 to 2.5 kgf·m
15 to 18 lbf·ft
(5) Main Switch
(6) Indicator Lamp
(7) Fuse Box
9Y1210595BRS0010US0
9Y1210595BRS0011US0
KiSC issued 11, 2013 A