Kubota GR1600EU Workshop Manual page 67

GR1600EU, WSM
Mower Belt Replacement
1. Remove the mower deck from the machine according to the
procedure "DISMOUNTING THE MOWER DECK".
2. Remove the all shields from the mower deck.
3. Clean around the pulleys to remove the belt (1) from the pulleys.
Slip the belt over the top of the pulley.
4. Remove the right bracket (3) which mounts the gear box (2) to
the mower deck.
NOTE
• Tighten each bolt and nut with following torque.
– Bolt M12:
77.6 to 90.2 N·m (8.0 to 9.2 kgf·m, 58 to 66 lbf·ft)
– Bolt M10 and Nut M10:
48.1 to 55.9 N·m (4.9 to 5.7 kgf·m, 36 to 41 lbf·ft)
5. To install a new belt, reverse the above procedure.
(1) Belt
(2) Gear Box
(3) Right Bracket
G-49
GENERAL
(4) M12 Bolt
(5) M10 Nut
9Y1210595GEG0068US0
KiSC issued 11, 2013 A