GR1600EU, WSM
Suction Filter Case
1. Remove the hose (3).
2. Remove the suction filter case (1) with the suction pipe 2 (2).
3. Remove the suction pipe 2 (2) from the suction filter case (1).
4. Remove the boss (7) and strainer (6) from the suction filter case
(1).
(When reassembling)
• After cleaning the strainer (6), install it in the suction filter case
(1).
• Install the boss (7) that sets two O-rings (5) in the suction filter
case (1).
• After setting the O-ring (4) in the suction pipe 2 (2), install the
suction pipe 2 (2) in the suction filter case (1).
• After setting the O-ring (9) in the transaxle case (8), install the
suction filter case (1) in the transaxle case (8).
Suction pipe 2 mounting
screw
Tightening torque
Suction filter case mounting
screw
(1) Suction Filter Case
(2) Suction Pipe 2
(3) Hose
(4) O-ring (Small)
(5) O-ring (Large)
2-S18
TRANSAXLE
7.9 to 8.8 N·m
0.80 to 0.90 kgf·m
5.8 to 6.5 lbf·ft
7.9 to 8.8 N·m
0.80 to 0.90 kgf·m
5.8 to 6.5 lbf·ft
(6) Strainer
(7) Boss
(8) Transaxle Case
(9) O-ring
9Y1210595TXS0029US0
KiSC issued 11, 2013 A