Relays (Starter, Engine Overheat Horn, Grass Container Open, Grass Container Full Switch, Buzzer) - Kubota GR1600EU Workshop Manual

GR1600EU, WSM
(15) Relays (Starter, Engine Overheat Horn, Grass Container Open, Grass
Container Full Switch, Buzzer)
Removing Starter Relay, Engine Overheat Horn Relay
1. Remove the starter relays (1), (2) from the steering support.
(1) Stater Relay
Removing Grass Container Open Relay, Grass Container Full
Switch Relay, Buzzer Relay [GR1600EU, GR1600F]
1. Remove the grass container.
2. Remove the discharge duct.
3. Remove the screws (1).
4. Push the relay stay (2).
5. Remove the relays (3), (4), (5).
(1) Screw
(2) Relay Stay
(3) Grass Container Full Switch Relay
Relay
1. Connect jumper leads across the battery positive terminal and
85 terminal (2), and across the battery negative terminal and 86
terminal (6).
2. Connect leads of an ohmmeter to 87a terminal (3) and 30
terminal (5).
3. Check continuity between 87a terminal (3) and 30 terminal (5).
4. If continuity is 0 ohms, the relay is proper.
(1) Relay
(2) 85 Terminal
(3) 87a Terminal
(4) 87 Terminal
6-S21
ELECTRICAL SYSTEM
(2) Engine Overheat Horn Relay
9Y1210595ELS0001US0
(4) Grass Container Relay
(5) Buzzer Relay
9Y1210595ELS0004US0
(5) 30 Terminal
(6) 86 Terminal
(7) Battery (12V)
9Y1210595ELS0005US0
KiSC issued 11, 2013 A