Kubota GR1600EU Workshop Manual page 65

GR1600EU, WSM
Replacing Mower Belt
1. Remove the mower deck from the machine.
2. Remove the left and right hand shield (4), (5) from the mower
deck. [RCK42GRF only]
3. Clean around the pulleys to remove the belt (3) from the pulleys.
Slip the belt (3) over the top of the left side pulley.
4. Remove the both brackets which mounts the gear box (6) to the
mower deck.
5. To install a new belt, reverse the above procedure.
Bolt (1)
Tightening torque
Bolt and Nut (2)
(1) Bolt
(2) Bolt, Nut
(3) Belt
G-47
GENERAL
79 to 90 N·m
8.0 to 9.2 kgf·m
58 to 66 lbf·ft
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
(4) Left Hand Shield
(5) Right Hand Shield
(6) Mower Gear Box
9Y1210595GEG0046US0
KiSC issued 11, 2013 A