Transaxle Case - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

(2) Transaxle Case

Checking Bearing
1. Hold the inner race, and push and pull the outer race in all
directions to check for wear and roughness.
2. Apply transmission fluid to the bearing, and hold the inner race.
Then, turn the outer race to check rotation.
3. If there is any problem replace it.
PTO Clutch Disc Wear
1. Measure the thickness of PTO clutch disc with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
Factory specification
Thickness of PTO clutch
disc
Allowable limit
Pressure Plate and Friction Plate Wear
1. Measure the thickness of pressure plate and friction plate 1, 2
with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
Factory specification
Thickness of pressure
plate
Allowable limit
Factory specification
Thickness of pressure
plate 1
Allowable limit
Factory specification
Thickness of pressure
plate 2
Allowable limit
Clutch Spring Free Length
1. Measure the free length of spring with vernier calipers.
2. If the measurement is less than the allowable limit, replace it.
Factory specification
Clutch spring free length
Allowable limit
2-S40
TRANSAXLE
9Y1210595TXS0090US0
1.3 to 1.5 mm
0.052 to 0.059 in.
1.2 mm
0.047 in.
9Y1210595TXS0067US0
1.55 to 1.65 mm
0.0611 to 0.0649 in.
1.50 mm
0.0591 in.
1.55 to 1.65 mm
0.0611 to 0.0649 in.
1.50 mm
0.0591 in.
0.75 to 0.85 mm
0.030 to 0.033 in.
0.70 mm
0.028 in.
9Y1210595TXS0068US0
45 mm
1.8 in.
42 mm
1.7 in.
9Y1210595TXS0069US0
KiSC issued 11, 2013 A