Kubota GR1600EU Workshop Manual page 219

GR1600EU, WSM
Steering Wheel, Side Bonnet and Panel
1. Remove the steering wheel (1).
2. Remove the side bonnet (3).
3. Remove the accelerator lever grip.
4. Disconnect the connectors for hour meter (4), main switch (5)
and light switch.
5. Remove the indicator lamps (6).
6. Remove the fuse box (7) from the steering support.
7. Remove the panel (2).
(When reassembling)
Steering Wheel mounting
Tightening torque
nut
(1) Steering Wheel
(2) Panel
(3) Side Bonnet
(4) Hour Meter
Separating Engine
1. Refer to "[2] PREPARATION" on page 1-S19.
Steering Support Assembly
1. Disconnect the drag link (4) from the sector gear (3).
2. Disconnect the connectors for the starter relay, timer relay,
regulator and buzzer unit.
3. Disconnect the accelerator wire (2).
4. Separate the steering support assembly (1).
(When reassembling)
Drag link locking nut
Tightening torque
Steering support mounting
screw
(1) Steering Support
(2) Accelerator Wire
5-S5
STEERING
20 to 24 N·m
2.0 to 2.5 kgf·m
15 to 18 lbf·ft
(5) Main Switch
(6) Indicator Lamp
(7) Fuse Box
9Y1210595BRS0010US0
9Y1210595BRS0011US0
76 to 80 N·m
7.7 to 8.2 kgf·m
56 to 59 lbf·ft
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
(3) Sector Gear
(4) Drag Link
9Y1210595BRS0012US0
KiSC issued 11, 2013 A