Tires; Tire Pressure; Tread - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

9. TIRES

[1] TIRE PRESSURE

CAUTION
To avoid personal injury:
• Do not attempt to mount a tire on a rim. This should be done by a qualified person with the proper
equipment.
• Always maintain the correct tire pressure.
Do not inflate tires above the recommended pressure as shown below.
• Inflation pressure in front tires vises quickly when using compressed air.
IMPORTANT
• Do not use tires larger than specified.
Tire sizes
Front 15 × 6.00-6, 4PR
Rear 20 × 10.00-8, 4PR
Though the tire pressure is factory-set to the prescribed level, it naturally drops slowly in the course of time.
Thus, check it everyday and inflate as necessary.

[2] TREAD

The tread can not be adjusted.
IMPORTANT
• Do not turn discs to obtain wider tread.
• Always attach tires as shown in the drawing.
• If not attached as illustrated, transmission parts may be damaged.
NOTE
• Use the tapered bolts for wheels with beveled or tapered holes.
Front
15 × 6.00 - 6, 4PR
A: 750 mm (29.5 in.)
Recommended Inflation
Max. pressure
2
200 kPa (2.0 kgf/cm , 29.0 psi)
2
140 kPa (1.4 kgf/cm , 20.3 psi)
Rear
20 × 10.00 - 8, 4PR
B: 800 mm (3.15 in.)
G-60
GENERAL
9Y1210595GEG0069US0
9Y1210595GEG0049US0
KiSC issued 11, 2013 A