Kubota GR1600EU Workshop Manual page 255

GR1600EU, WSM
Brush Holder
1. Check the continuity across the brush holder and the holder
support with an ohmmeter.
2. If it conducts, replace the brush holder.
Armature Coil
1. Check the continuity across the commutator and armature coil
core with an ohmmeter.
2. If it conducts, replace the armature.
3. Check the continuity across the segments of the commutator
with an ohmmeter.
4. If it does not conduct, replace the armature.
Field Coil
1. Check the continuity across the lead (1) and brush (2) with an
ohmmeter.
2. If it does not conduct, replace the yoke assembly.
3. Check the continuity across the brush (2) and yoke (3) with an
ohmmeter.
4. If it conducts, replace the yoke assembly.
(1) Lead
(2) Brush
6-S25
ELECTRICAL SYSTEM
9Y1210595ELS0043US0
9Y1210595ELS0044US0
(3) Yoke
9Y1210595ELS0045US0
KiSC issued 11, 2013 A