Tightening Torques - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-12.)
Brake plate mounting screw
Universal joint mounting screw
Transaxle mounting screw
Hydrostatic transmission mounting screw
Hydrostatic transmission mounting screw 2
Center section mounting hex. socket head screw
By-pass valve plug
Check valve plug
PTO clutch assembly mounting screw
Beam mounting screw
Transaxle case screw
42T gear mounting screw
Item N·m
34 to 40
9.81 to 11.2
48 to 55
24 to 27
18 to 20
18 to 20
15
30
18 to 20
18 to 20
7.9 to 8.8
9.81 to 11.2
2-S5
TRANSAXLE
kgf·m lbf·ft
3.5 to 4.0 25 to 29
1.00 to 1.15 7.24 to 8.31
4.9 to 5.7 36 to 41
2.4 to 2.8 18 to 20
1.8 to 2.1 13 to 15
1.8 to 2.1 13 to 15
1.5 11
3.1 22
1.8 to 2.1 13 to 15
1.8 to 2.1 13 to 15
0.80 to 0.90 5.8 to 6.5
1.00 to 1.15 7.24 to 8.31
9Y1210595TXS0013US0
KiSC issued 11, 2013 A