Kubota GR1600EU Workshop Manual page 70

GR1600EU, WSM
NOTE
• The following special tools are not prevented, so make them referring to the figure.
Connecting Rod Alignment Tool
Code No.
• 07909-31661
Application
• Use to check the connecting rod alignment.
Applicable range
• Connecting rod big end I.D.
30 to 75 mm dia. (1.2 to 2.9 in. dia.)
• Connecting rod length
65.0 to 300 mm (2.56 to 11.8 in.)
Nozzle Tester
Code No.
• 07909-31361
Application
• Use to check the fuel injection pressure and spray pattern of
nozzle.
Measuring range
• 0 to 50 MPa (0 to 500 kgf/cm
Plastigauge
Code No.
• 07909-30241
Application
• Use to check the oil clearance between crankshaft and bearing,
etc..
Measuring range
• Green: 0.03 to 0.07 mm (0.001 to 0.003 in.)
• Red: 0.05 to 0.1 mm (0.002 to 0.006 in.)
• Blue: 0.1 to 0.2 mm (0.004 to 0.009 in.)
Red Check
Code No.
• 07909-31371
Application
• Use to check cracks on cylinder head, cylinder block, etc..
G-52
GENERAL
WSM000001GEG0020US0
2
, 0 to 7200 psi)
WSM000001GEG0021US0
WSM000001GEG0022US0
WSM000001GEG0023US0
9Y1210604GEG0052US0
KiSC issued 11, 2013 A