Transaxle Case - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

(2) Transaxle Case

Disassembling PTO Clutch Assembly
1. Remove the PTO cover assembly (1) with the brake disc and
friction plate, PTO clutch assembly (3) and 24T gear (2) from
the transaxle case.
2. Remove the ball bearing (4) from the transaxle case.
3. Remove the 24T gear (2), PTO clutch assembly (3), brake disc
and friction plate (5) from PTO shaft (6).
4. While pressing the PTO clutch assembly (3), turn the clutch
case (7) clockwise. Then, separate the clutch case (7) and the
spline boss (12) with clutch disc and friction plate (13).
5. Remove the thrust needle bearing (8), thrust collar (9), collar
(10) and spring (11).
6. Remove the external snap ring (14), clutch disc and friction
plate (13) from the spline boss (12).
(When reassembling)
PTO cover assembly
Tightening torque
mounting screw
(1) PTO Cover Assembly
(2) 24T Gear
(3) PTO Clutch Assembly
(4) Ball Bearing
(5) Brake Disc and Friction Plate
(6) PTO Shaft
(7) Clutch Case
2-S24
TRANSAXLE
18 to 20 N·m
1.8 to 2.1 kgf·m
13 to 15 lbf·ft
(8) Thrust Needle Bearing
(9) Thrust Collar
(10) Collar
(11) Spring
(12) Spline Boss
(13) Clutch Disc and Friction Plate
(14) External Snap Ring
9Y1210595TXS0042US0
KiSC issued 11, 2013 A