Kubota GR1600EU Workshop Manual page 165

GR1600EU, WSM
Beam
1. Disconnect the connector from the PTO switch (1).
2. Remove the spring (2) from the PTO lever (3).
3. Remove the PTO rod.
4. Remove the filling pipe (4).
5. Remove the hose clamp (7) of breather hose (6).
6. Remove the beam (5).
(When reassembling)
• After assembling the beam, fix the breather hose (6) to the
beam (5) with the hose clamp horizontally along the beam (5).
(1) PTO Switch
(2) Spring
(3) PTO Lever
(4) Filling Pipe
Brake Rod
1. Disconnect the brake rod 1 (6).
2. Remove the lock nut (1), plain washers (2) and brake spring (3).
3. Remove the brake plate (5).
4. Remove the brake rod 2 (4) and brake rod 1 (6).
(When reassembling)
• After assembling the brake rod 1, 2 (4), (6) and brake spring
(3), be sure to adjust the brake pedal free travel. (Refer to
"4. CHECKING, DISASSEMBLING AND SERVICING" on
page 3-S4.)
Brake plate mounting
Tightening torque
screw
(1) Lock Nut
(2) Plain Washer
(3) Brake Spring
2-S15
TRANSAXLE
(5) Beam
(6) Breather Hose
(7) Hose clamp
9Y1210595TXS0023US0
34 to 40 N·m
3.5 to 4.0 kgf·m
25 to 29 lbf·ft
(4) Brake Rod 2
(5) Brake Plate
(6) Brake Rod 1
9Y1210595TXS0024US0
KiSC issued 11, 2013 A