Kubota GR1600EU Workshop Manual page 211

GR1600EU, WSM
Bonnet and Side Bonnet
1. Disconnect the connectors (5) from the head light.
2. Remove the wire harness (4) from the bonnet.
3. Remove the bonnet (1) with bonnet bracket (2).
4. Remove the side bonnet (3).
(1) Bonnet
(2) Bonnet Bracket
(3) Side Bonnet
Separating Front Axle Assembly
1. Disconnect the drag link (1) from the front axle assembly (2).
2. Support the front of frame with jacks.
3. Remove the front wheels.
4. Loose the anti-vibration bolts (5).
5. Remove the center pin locking nut (3), and draw out the center
pin bolt (6).
6. Separate the front axle assembly (2).
(When reassembling)
• Apply grease to the outer side of center pin collar (4).
Tightening torque Center pin locking nut
(1) Drag Link
(2) Front Axle Assembly
(3) Center Pin Locking Nut
4-S5
FRONT AXLE
(4) Wire Harness
(5) Connector
9Y1210595ENS0024US0
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
(4) Center Pin Collar
(5) Anti-vibration Bolt
(6) Center Pin Bolt
9Y1210595FBS0006US0
KiSC issued 11, 2013 A