GR1600EU, WSM
(2) RCK42-GR16
Dismounting Mower
1. Turn the front wheel to the right.
2. Pull out the mower deck to the left.
Cutting Height Adjusting Dial
1. Park the machine on level ground, and stop the engine.
2. Set the cutting height adjusting dial (1) to "1" position.
3. Set the front anti-scalp rollers at the top position.
4. Lower the mower lift lever (2) and lock in the lower position.
(1) Cutting Height Adjusting Dial
Front Link
1. Pull the lever fulcrum fixing pin (2) and turn it counterclockwise
to lock.
2. Push down the link fixing lever (1).
3. Remove the front link (3) from the mower deck.
(When reassembling)
• When you attach the front link, make sure the length of the front
link.
(1) Link Fixing Lever
(2) Lever Fulcrum Fixing Pin
7-S11
MOWER
9Y1210595MOS0010US0
(2) Mower Link Lever
9Y1210595MOS0007US0
(3) Front Link
9Y1210595MOS0008US0
KiSC issued 11, 2013 A