GR1600EU, WSM
(11) Lighting System
Head Light Switch
1. Disconnect the wiring leads from head light switch and remove
it.
2. Measure the resistance with an ohmmeter across the head light
switch terminals in each position.
3. If the resistance differs from the factory specifications, the head
light switch is faulty.
Factory
Resistance
specifica-
tion
(1) Head Light Switch
Engine Oil Pressure Lamp Harness
1. Disconnect the wiring harness from the engine oil pressure
switch (1) with the main switch OFF.
2. Turn the main switch ON and connect a jumper lead (2) from the
the chassis to the wiring harness.
3. If the engine oil pressure indicator lamp does not light, the wiring
harness is faulty.
(1) Engine Oil Pressure Switch
(2) Jumper Lead
6-S17
ELECTRICAL SYSTEM
OFF
Infinity
ON
0 Ω
9Y1210595ELS0031US0
(a) From Oil Pressure Lamp
9Y1210595ELS0032US0
KiSC issued 11, 2013 A