Checking, Disassemnling And Servicing; Checking And Adjusting; Preparation - Kubota GR1600EU Workshop Manual

GR1600EU, WSM

4. CHECKING, DISASSEMNLING AND SERVICING

[1] CHECKING AND ADJUSTING

[2] PREPARATION

(1) Separating Steering Support Assembly
Steering Wheel Play
1. Turn the front wheels straight ahead.
2. Rotate the steering wheel lightly by hand, and measure the play.
3. If the measurement exceeds the factory specifications, replace
the steering shaft and sector gear.
Steering wheel play Factory specification
Dismounting Mower
1. Refer to "[2] PREPARATION (DISMOUNTING MOWER)" on
page 7-S10.
Removing Container
1. Refer to "[2] PREPARATION" on page 2-S10.
Battery
1. Refer to 2-S13.
Discharge Duct
1. Refer to 2-S11.
Container Base
1. Refer to 2-S11.
Seat
1. Remove two snap pins (2), (4).
2. Remove the seat (1) and snap plate (3).
(1) Seat
(2) Snap Pin
Fender
1. Remove the speed change pedal (5).
2. Peel the step sheet (4) halfway.
3. Remove the fuel cap (1).
4. Remove the fender (2).
(1) Fuel Cap
(2) Fender
(3) Fender Mounting Screw
5-S4
STEERING
30 to 70 mm
1.2 to 2.7 in.
9Y1210595STS0004US0
9Y1210595TXS0017US0
9Y1210595BRS0005US0
9Y1210595BRS0006US0
9Y1210595BRS0007US0
9Y1210595BRS0008US0
(3) Snap Plate
(4) Snap Pin
9Y1210595TXS0019US0
(4) Step Sheet
(5) Speed Change Pedal
9Y1210595BRS0009US0
KiSC issued 11, 2013 A