Every 1500 Service Hours; Checking Injector Tip; Checking Egr Cooler; Changing Oil Separator Element - Kubota V2403-CR-TIE4-BG Operator's Manual

28 REGULAR CHECKS AND MAINTENANCE WORK

EVERY 1500 SERVICE HOURS

BChecking injector tip
Consult your local KUBOTA Dealer for this service.
BChecking EGR cooler
Consult your local KUBOTA Dealer for this service.
BChanging oil separator element
[D1803-CR-TIE4, V2403-CR-TIE4, V2403-CR-TE4-BG,
V2403-CR-TIE4-BG, V2607-CR-TIE4, V3307-CR-TIE4,
V3800-TIE4]
*If equipped with the oil separator
To avoid personal injury or death:
A Be sure to stop the engine before
changing the oil separator element.
1. Remove the cover and take out the oil separator
element and gasket. Then wipe oil and grease off the
zone in question.
2. Fit a new oil separator element and gasket into
position.
[D1803-CR-TIE4, V2403-CR-TIE4, V2403-CR-TE4-BG,
V2403-CR-TIE4-BG]
(1) Oil separator
[V2607-CR-TIE4, V3307-CR-TIE4]
(1) Oil separator
[V3800-TIE4]
(1) Oil separator
(1) Body
(2) Oil separator element
(3) Gasket
(4) Cover
BChecking PCV valve (Positive Crankcase
Ventilation valve)
[D1803-CR-TIE4, V2403-CR-TIE4, V2403-CR-TE4-BG,
V2403-CR-TIE4-BG, V2607-CR-TIE4, V3307-CR-TIE4,
V3800-TIE4]
Consult your local KUBOTA Dealer for this service.

EVERY 3000 SERVICE HOURS

BChecking turbo charger
Consult your local KUBOTA Dealer for this service.
BChecking EGR System
Consult your local KUBOTA Dealer for this service.