Function Of Water Separator; Specification Of Water Separator (Type2); Electromagnetic Fuel Feed Pump; Outline Of Electromagnetic Fuel Feed Pump - Kubota D1803-CR-E4 Workshop Manual

4. ENGINE
(1) Hand pump
(2) Separator body
(3) Level sensor

3.6.4 Function of water separator

The water separator removes water and solid particles
included in the fuel.
The amount of water in the water separator can not be
determined by looking at the outside so an alarm is
sent to the operator using a level sensor.
3.6.5 Specification of water separator
(Type2)
Hand pump discharge volume
4-18
(A) Fuel inlet
(B) Fuel outlet
3
15 cm / stroke
0.92 cu.in. / stroke
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4

3.7 Electromagnetic fuel feed pump

3.7.1 Outline of electromagnetic fuel feed
pump
The electromagnetic fuel feed pump supplies fuel to the
engine.
3.7.2 Structure of electromagnetic fuel feed
pump
The electromagnetic fuel feed pump is made up of a
pump filter and connector and the like.
(1) Fuel inlet
3.7.3 Function of electromagnetic fuel feed
pump
The electromagnetic fuel feed pump feeds fuel to
supply the fuel to the supply pump.
Voltage is supplied to the electromagnetic fuel feed
pump when the key is turned ON.
3.7.4 Specification of electromagnetic fuel
feed pump
Rated voltage
MECHANISM
3. Fuel system
(2) Fuel outlet
12 V
KiSC issued 12, 2018 A