Table of Contents
Advertisement
MODE Button
When the MODE button is pressed and
released it will activate the Riding Mode
Selection Menu in the display screen.
Further presses of the MODE button will
scroll
through
the
modes, see Riding Mode Selection on
page 40.
Press and hold the MODE button to
activate the ROAD mode, and enable
ABS and traction control, if disabled.
For more information on riding mode
selection and configuration, see page 52.
Direction Indicator Switch
When the indicator switch is pushed to
the left or right and released, the
corresponding direction indicators will
flash on and off. To turn off the
indicators, push and release the switch
in the central position.
Models Equipped with Automatic Self-
Cancelling Indicators
A short press and release of the
indicator switch to the left or right will
cause
the
corresponding
indicators to flash on and off three
times, then turn off.
A longer press and release of the
indicator switch to the left or right will
cause
the
corresponding
indicators to flash on and off.
The indicators are automatically turned
off after eight seconds and after riding
a further 65 metres.
To disable the indicator self-cancel
system refer to the Bike menu section
on page 59 .
The
indicators
manually. To manually turn off the
indicators,
press
indicator switch in the central position.
available
riding
direction
direction
can
be
cancelled
and
release
the
GENERAL INFORMATION
Joystick Button
The Joystick is used to operate the
following functions of the instruments:
▼ Up - scroll the menu from the bottom
to the top
▼ Down - scroll the menu from the top
to the bottom
▼ Left - scroll the menu to the left
▼ Right - scroll the menu to the right
▼ Centre - press to confirm selection.
Horn Button
When the horn button is pushed, with
the ignition switch turned on, the horn
will sound.
67
Advertisement
Table of Contents
