Set Fax Forwarding Destination For Line 1 & Print Faxes For Line 2 - Muratec MFX-C2280 Feature Overview Manual

Set Fax Forwarding Destination
for Line 1 & Print Faxes for Line 2
PRE-REqUISITES
• Forwarding destinations have been registered in a One-Touch key
(program an Email Address, SMB Folder, FTP or User Box destination)
APPLICATION
This law office is shared by
several lawyers . They have
equipped their bizhub MFP
with two fax lines in order
to accommodate the fax
transmissions received . For
those business associates
that send faxes that have to
be archived electronically, they have been given the fax number for Line 1 . For those
business associates that require hard copy output of each fax received, they have been
given the fax number for Line 2 .
Though all faxes are being sent to the same bizhub MFP, the line that receives the
incoming fax will handle the reception accordingly--Line 1 receptions are forwarded
to an FTP site for electronic archival and
Line 2 receptions are printed for hard
copy reference .
1 . Touch Utility .
2 . Touch Administrator Settings .
3 . Enter Password (Default is 1234567812345678) .
4 . Touch OK .
5 . Touch Fax Settings .
6 . Touch TX/RX Settings .
7 . Access screen 3/3 by pressing the down arrow
8 . Touch Individual Receiving Line Set Up .
22
Line 2
1
2
You will not be able to access the
necessary menus if the Pre-requisites
have not been met.
If not on the home screen,
touch the Menu key on
the Control Panel
.
!
.