Blocking Junk Faxes; Set Block Junk Faxes - Muratec MFX-2830 Operation Manual

FAX
Chapter3
You can block junk faxes several ways, such as only allowing faxes to be received from num-
bers registered in one-touch key or speed-dial or by setting the machine to block faxes from
designated numbers.
Operating tips
There are 3 ways to block junk faxes.
Mode 1:
Mode 2:
Mode 3:
OFF:
Mode 1
Receive
Not Receive
:Incoming numbers
:Numbers registered in one-touch key and speed-dial
:Numbers registered as junk fax numbers

Set block junk faxes

3-156
FAX Chapter3 Communication Management
●

Blocking Junk Faxes

This method sets the machine to receive faxes only from contacts registered in one-touch key
and speed-dial. The last four digits of the registered fax number are checked against the con-
tact's ID, and the fax will only be received if they match.
This method requires you to register specific junk fax numbers, and then the machine blocks
any faxes from those numbers. The final four to eight digits of the applicable fax numbers are
registered. Up to 50 contacts (fax numbers) can be entered.
This method is a combination of methods 1 and 2. The machine blocks faxes from any num-
bers not registered in one-touch key or speed-dial. The machine also blocks faxes from con-
tacts registered as junk fax numbers.
Junk faxes are not blocked.
Mode 2
Not
receive
Receive
1
Press
SETTING
2
Press [Fax Functions].
Mode 3
Not
receive
Not receive
.
Default: OFF
Settings
Select item to edit.
Paper
Speed Dial Group Name
Settings
Copy Fax Scanner
Functions Functions Settings
User
Counter
Install
Enter
Store Doc
Settings
Management