Making Copies; Your Machine S Copier Features; Basic Copy Procedure; Single Copy - Muratec MFX-1300/1700 Operating Instructions Manual

Basic operation

Making copies

Your machine s copier features

Your machine has the following copier features:
Single copy (see the right column on this page)
St acking multiple copies (see page 2.13)
Sorting multiple copies (see page 2.13)
Enlarged or reduced copies (see page 2.13)
Negative/positive copy (Reverse black and white areas) (see page 2.17)
Combine copy (only for MFX-1700) (see page 2.17)
Ultra copy mode (only for MFX-1700) (see page 2.18)

Basic copy procedure

1 Press / to change to
C O P Y FA X
Copy mode.
When the machine is in the Copy mode, the
Copy Ready
Ltr Auto
Note: For details about each item, see Making copy settings, pages 2.15 2.16
2.12
COPY/FAX key
shows:
LCD
1
Number of copies
100%
Copy reduction or enlargement ratio
Recording paper size
Document size
2 Place your original document in
as you would to send a fax.
3 Enter the document size by pressing the
4
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
Set copy reduction or enlargement ratio
Note: For details about each item, see Making copy settings, pages
2.15 2.16.
5 Press .
STA R T
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
STO P

Single copy

1 Press / to change to Copy mode.
C O P Y FA X
2 Place your original document in
as you would to send a fax.
3 If you are using glass, enter the document size by pressing the
FBS
.
D O C U M E N T SIZE
4 As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: If you want to enlarge copy, use the
5 Press .
STA R T
face up, or on the glass face down j u s t
ADF FBS
.
D O C U M E N T SIZE
.
C O P Y RESET
.
face up, or on the glass face down j u s t
ADF FBS
glass.
FBS