Muratec MFX-1300/1700 Operating Instructions Manual page 21

Getting started
6 Press o r until the recording paper size for the bypass tray you want
appears. In this example, we ve chosen L t r.
Bypass Tray :Ltr
/ /Enter
7 Press .
ENTER
Press to return the machine to standby mode.
STO P
Loading paper in bypass tray
When you need to use a size of paper not currently loaded in your machine s paper cas-
sette(s), or when you want to use a special type of paper (such as transparency film),
use the bypass tray.
1 Open the bypass tray on the right
side of your machine.
2 Pull out the hopper of the bypass
tray and pull the flapper release
lever.
3 Place the paper on the bypass tray.
Adjust the paper guide to fit the
paper and insert the pa p e r u n t i l i t
comes to a stop.
Then push back the flapper release
lever.
Note: In Fax mode, if you have set the Letter, Legal or Half-letter sized paper in the
bypass tray, the machine will use this paper when it runs out of the paper in the
paper cassette during the fax reception.
1.10