Muratec MFX-1300/1700 Operating Instructions Manual page 20

2 While pressing the release lever,
slide the paper length guide to the
position for the paper size you want
to use.
3 Press down the pa p e r l i fting plate.
4
Insert the paper into the cassette.
Before you insert paper in the
cassette, stack it so the leading
edge and sides of the paper are
even.
Do not stack the paper over the
limit mark inside of the cassette.
Place the edges of the top sheet
under the meta l tabs on the cas-
s e t t e s l e ft and right side.
5 Adjust the paper guides to fit the
size of paper.
6
Gently push the paper cassette back into its original (closed) position. Yo ul l f e e l a
click when it s properly in place.
7 A t tach the paper size sticker on the cassette s f r o n t .
Helpful Ti p : The paper level indicator on the front
paper cassette lets you see how
much paper is in the cassette without
your having to open the cassette.
When you see the paper level indica-
tor drop (i. e., show more blue area),
make sure you have a supply of
paper nearby. Then, when you see
the Please Supply Paper message
on the display, y o u l l b e r e a d y t o r e f i l l
the cassette.
Important: To avoid paper jams, do not refill this paper cassette without first remov-
ing all of any paper which may remain in it. In other words, do not just
add sheets to an already-loaded stack.
Setting of the Paper Size
Default setting: 1st cassette: Ltr (Letter-sized paper), 2nd cassette(option): Ltr, Bypass
t r a y : L t r
When you change the size of paper in the paper cassette, also you must change the
paper size setting, below.
1 Press Program key, , 1 , 0 , 1 , . The
B ENTER
1st Cassette :Ltr
/ /Enter
2 Press o r until the recording paper size for the first cassette you want
appears. In this example, we ve chosen Legal.
1st Cassette :Legl
/ /Enter
3 Press .
ENTER
If you have the optional second cassette, proceed to step 4.
Otherwise, skip to step 6.
4 Press o r until the recording paper size for the second cassette you want
appears. In this example, we ve chosen half letter .
2nd Cassette :HLtr
/ /Enter
5 Press .
ENTER
Getting started
Paper level
indicator
shows:
LCD
1.9